Followers

Windows 8 Metro Modern UI Style Jelly Bean 4.1.1 firmware installed on Pipo S1 About Tablet

1. First, download Windows 8 Metro / Modern UI Style firmware from here or from here. Download the Pipo S1 .img files from here or from here.
2. Extract downloaded archives. Replace the boot, kernel & recovery img files with the ones provided in Oma_Odys_Genio_JB_v1.4/rockdev/image folder.
3. Connect tablet in bootloader mode.
4. If you don't have driver installed you can install it from "drivers" folder.
5. Go to the folder RKDevelopTool_v1.35 and run RKAndroidTool (do not change anything!).
6. If drivers are installed correctly, in the bottom will say "Found RKAndroid Loader Rock Usb".
7. Press Erase IDB and wait after it finish press OK (it will take 10-20 seconds)
8. Then press 'Run' button. Tablet will restart when everything finish. (first run may take up to 5 minutes) 

Enjoy this fine release

Uhost2 newest firmware version 411.000.11.130424 About Tablet Free Download

The new 411.000.11.130424 firmware version for Smallart U2 is available for download. Download link here or from here.
Installation: download the new firmware, change the name of the update file into update.img and save it in SD card. Update last like 5 minutes, so be patient.
Enjoy!

U2.411.000.11.130424 release notes

- [Opt] update WiFi driver and improve performance.
- [Opt] use FFMPEG for video and audio decoder
- [Fix] sometime app force close after change language.
- [Add] support Ethernet auto connect after restart
- [Add] screen rotate option
- [Opt] Bluetooth support send all file types
- [Opt] Update AirmouseManager.apk
- [Opt] Update Explorer.apk
- [Del] lock security settings

ExxpeROM2.6 bq Edison firmware installed on Pipo S1 tablet Free Download

Here is the easiest to do this firmware update:
1. Download exxpeROM2.6_BqED firmware image from: link1, link2 or link3.
2. Put your Pipo S1 in 'firmware update mode'.
3. Run Rockchip Batch Tool v1.7, select the proper image .img file from your desktop, and after your device is found by the program, press the 'Restore' button and wait for 2-3 minutes to finish.
Credits for this firmware go to exxpecial.
  Enjoy this firmware release, share is love

Cube Win8 firmware installed on Pipo S1 About tablet Free Download

Here is the easiest to install this firmware:
1. Download Cube Win8 archive from: link1 or link2.
2. Put your Pipo S1 in 'firmware update mode'.
3. Extract the archive and run RK30update.exe, uncheck Boot, check Kernel and select kernel_maple_#117, and after your device is found by the program, press the 'Actualizar' button and wait for 2-3 minutes to finish.
4. After first boot go directly to 'Settings'--> 'Developer Options' and check these options: USB Debugging and in 'Security'--> enable 'Unknown Sources'. 
5. Follow the instructions from the video below. Enable WiFi network and add your Google account. Connect to Play Store and install a launcher and a file eplorer (like ES Explorer) to navigate to your external micro SD card and install 'full!screen+' or 'Button Savior Root' application.
Enjoy this firmware release, share is love

How to dump current Android firmware Tutorial Free Download


Romdump is a (very) simple program that dumps the boot, recovery and system partitions to your SD card, this will allow someone who is technicaly minded to create a recovery image.
First, you need a rooted device before you can begin the process. After you have rooted it, you have download from Play Store an application called 'Android terminal emulator'.

Next, copy the 'romdump' file to your SD card and put the sdcard into your device. Copy and paste the romdump file to /data/local/ (open root browers /root access file manager and then go to data folder and then open local folder and paste the file romdump). Change the permission of the romdump file (using ES File Explorer --> Hold the file --> Properties --> and change it to 755 (rwxrw-rw).
Created a folder name 'romdump' in SD card.  Open the installed android terminal emulator app and use to following command:

After you run that you can copy the whole folder from /sdcard/romdump to your PC (using external sdcard, usb plug-in, etc)
Note: if you get a error about "cannot create /sdcard/romdump/..." that means you need remove a file/folder in your sdcard that named as romdump. You will see all the things whats going on below if you see this then you will get the ROM dumped if not then follow the steps once again.
Here is the list of the files you get after running romdump:

config.gz
system.info.gz
boot.img
recovery.img
system.tar
checksum.md5
Android ROM dumper v0.82b
(c)2011 Sebastian404
Device : xxxxxxx

Creating required files... done.
Opening mtd table... done.
Dumping kernel config... /proc/config.gz: No such file or directory
done.
Dumping boot partition... done.
Dumping recovery partition... done.
Dumping system partition... done.
Creating Checksums... done.
Cleaning up... done.
All done.

Android Jelly Bean 4.2.2 Test Build v3.2 firmware installed on Pipo S1 tablet Free

Thanks to Oma, now we can enjoy Android Jelly Bean 4.2.2 Test Build v3.2 on our Pipo S1 tablet. I'll be back with the instructions.
- System ext4 
- CWM 6.0.1.5 recovery 
- Internal Storage 2,5 GB 
- external SD mounted as NAND (up to 64 GB) 
- TabletUI & Multiuser 
- Ethernet & Hotspot Support 
- Init.d support 
- USB-Hub enabled 
- Gamepad (PS2, XBox, ...) 
- Kernel modules (cifs, tun, lan, serial) 
- Device spoofed as Nexus 7 
- Gameloft/Asphalt 7 compatible 
- latest hosts, su, su-binary, busybox 
- MX Video-Player, Play Music & Volume+ 
- Reboot Menue, Kernel Tuner, Pimp My Rom, Hide Task-Bar 
- Dateimanager HD (Root) 
- Nova Launcher 


Download Rockchip Batch Tool v1.7 & Rockusb Drivers v3.5 Free Download

You can download Rockchip Batch Tool v1.7 & Rockusb Drivers v3.5 from here, here or here.

2012-09-14 a70-v4 Tablet Kimo Malaysia Firmware Free Download

Tablet Board id: 2012-09-14 a70-v4



 Download
How To Chk Touch Ic Driver

Pipo S1s 800x480 Stock firmware 4.2.2 download


Pipo launched the Smart S1s tablet, which is an improved version of Smart S1 tablet. S1s has a better display - IPS panel with 1024*600 resolution (S1 has 800*480 resolution). Optional, S1s can be equipped with 2MP back camera. In rest, all the specifications are the same.
Now you can now download Pipo S1s 800x480 Stock firmware 4.2.2 download from here or from here.

Vplay- the best Android application for streaming online HD TV Series Free Download


Watch your favorite TV series directly on your tablet Pipo S1. You need to create a free account on http://vplay.ro to use Google Play mobile application. Categories of TV Series and seasons are listed in the left side menu. To access the on-screen slide from left to right or click on the application icon in the upper left. To use subtitles is recommended to use MX Player application, or any other player that can open subtitles of storage space. To open subtitles MX Player should automatically set to the same folder in which subtitles Subtitles. 
See the video to see the exact steps to open subtitles automatically.
1. Vplay Settings -> tick and Open subtitles Download subtitles automatically, and set a folder where to be downloaded subtitles
2. MX Player Settings -> Subtitle -> to be checked Enable subtitles and subtitle folder be set to the same folder as the Vplay
Download vplay.apk from here, here or here.

Google Play Games downloaded now on Android Free Download

Google recently launched a special application for gamers: Google Play Games. It is a sort of gaming hub, which you can access by downloading the application from here or download the .apk file from here or from here.

Google Play Games allows you to discover new games, sites to watch achievement unlocked your scores and play new titles with friends around the world. You can compare your scores with other players and join multiplayer sessions. Play Games has a solid list of recommendations games.

You've probably already noticed that some new games downloaded from the Play Store will require authentication with a Google account and indicate your friends and contacts on Google+. Google Play Games  requires Android 2.2 and up

Cyclone Voyager 7" rooted Android 4.2.2 on Pipo S1 tablet Free Download

Here is the easiest to do this firmware update:
1. Download rooted Android 4.2.2 by Kasty firmware from: link1 or link2.
2. Put your Pipo S1 in 'firmware update mode'.
3. Run Rockchip Batch Tool v1.7, select the proper image .img file from your desktop, and after your device is found by the program, press the 'Restore' button and wait for 2-3 minutes to finish. The first boot is very long, wait about 5-7 minutes.
Custom firmware features:
  • root with latest SuperSU version 1.51 (free version)
  • removed most Chinese and unnecessary applications
  • Google Play Store fixes so more application are visible/compatible
  • updated busybox v1.21.0.git (2012-11-29)
  • Unix like init.d boot scripts support
  • changed permissions on external sdcard to allow write access
  • increased space for applications (/data partition) to 2 GB
  • 11.500 points in Antutu Benchmark
  • HDMI output not working.
1. To install the CWM 6.0.2.7 please follow the update steps from this post. Then download CWM 6.0.3.1 from here or from here and copy it as it is on a micro SD card, install Quick Boot free from Play store, reboot into recovery, then choose 'install zip from sd card' and apply the new CWM zip file from your card. Enjoy CWM 6.0.3.1 on your tablet!
Enjoy this firmware release, share is love

Android Jelly Bean 4.2.2 v1.2 firmware installed on Pipo S1 tablet Free Download

Here is the easiest to do this firmware update:
1. Download Android Jelly Bean 4.2.2 v1.2 firmware image from: link1 or link2.
2. Put your Pipo S1 in 'firmware update mode'.
3. Run Rockchip Batch Tool v1.7, select the proper image .img file from your desktop, and after your device is found by the program, press the 'Restore' button and wait for 2-3 minutes to finish. The first boot is very long, wait about 5-7 minutes.


What we have at the moment:
- Firmware 4.2.2 from PIPO S1S
- Removed Chinese applications
- Added root
- Default language English
- Customise kernel
- G-sensor is operating

- Camera is working
- HDMI output is working
- Antutu produces about 11.647 points

- Wifi Display Miracast support 
- 2 GB of internal storage

Firmware provided by Cripple Guy.
Credits for this firmware go to realmaple.

1. To install the CWM 6.0.2.7 please follow the update steps from this post. Then download CWM 6.0.3.1 from here or from here and copy it as it is on a micro SD card, install Quick Boot free from Play store, reboot into recovery, then choose 'install zip from sd card' and apply the new CWM zip file from your card. Enjoy CWM 6.0.3.1 on your tablet!


Enjoy this firmware release, share is love!  

 Always keep in mind that this is not a review, just a first sight of this firmware. You have to test it more for another details, to see if it satisfies your needs

The easiest way to put your Pipo Smart S1 tablet in 'firmware update mode Procedure


So, this is the easiest way to put your Pipo Smart S1 tablet in 'firmware update mode':
1. Make sure your tablet is turned off.
2. Connect USB to tablet, but not computer yet.
3. Hold volume - button down and connect USB to the computer.
4. The Rockchip tool should now see the tablet and give you the green light.
Enjoy, share is love

Download Rockchip Batch Tool v1.7 & Rockusb Drivers v3.5 Free Download


You can download Rockchip Batch Tool v1.7 & Rockusb Drivers v3.5 from here, here or here.

Download PhoenixCard v3.06 About Tablet Flasher


PhoenixCard is a software that let you burn Android firmwares on micro SD cards. Phoenixcard is free Windows based software designed to create bootable images and write them to connected removeable drives, such as SDCARDs or MicroSDs. The removeable drive is then placed into the target device and the device is made to boot from the removeable drive, applying an update or complete reimage to the target.  It is used especially for Allwinner A10 ARM processors.

Download PhoenixCard v3.06 from here, here or here.Phoenix Suite1.08

Create installation SD card.
Important: This will erase the SD card

  • Download and unzip the Phoenixcard archive to a folder on your PC. 
  • Unzip the single (imagename).img from the downloaded image to an accessible folder on your Windows system.
  • Obtain a micro SD card of at least 1GB in size and connect it to your PC in some fashion. It should be accessible under a drive letter in Windows.
  • Browse to the folder where you unzipped Phoenixcard and find the PhoenixCard.exe file with the green folder icon next to it. Double click to launch. The Phoenixcard software will launch.
  • Using the drop down to the right of Disk select the windows drive letter that contains your Micro SD card.
  • Click on the image button and browse to whereever you extracted (imagename).img to, and select the file.
  • Ensure Product is selected under Write Mode. Product mode will create a self booting Micro SD designed to apply a separate image to a device.
  • Click on Burn. Pay attention to the status messages. Once it is complete you can eject the Micro SD from your windows system
  • Video Tutorial See

Download LiveSuit Pack v1.11 About Tablet Flasher Free Download

This archive contains the flash tool LiveSuit v1.11 and Widows USB drivers needed when upgrading Allwinner A10 / A13 devices. You can download LiveSuit Pack v1.11 from here, here or here.Driver


Now, before anything, makes sure your tablet / android device is charged up, 100% charge is nice.

Once extracted, and before attaching your tablet to your PC, run the file '
LiveSuitPack_1.11.exe' from within the Livesuit folder. This should install a new device on your system (VID_1f3a_PID_efe8). This device may show with an exclamation mark in Windows Device Manager, this doesn't matter and can be ignored. Now edit the firmware name (.img file) that you have downloaded so that there are no Chinese or Foreign characters within the filename.

Without attaching your tablet to your PC run 'LiveSuit.exe' from within the Livesuit folder. You should get an application like in the image above. You will be asked if you want to be guided through the process, select no.
Click on the leftmost icon (a cube), browse to your downloaded firmware image, and select it.

Turn the tablet completely off. The tablet should be off throughout the next process. Hold down the power button for ten or fifteen seconds if you're not sure, just make sure it is off. Charged up, but off. Connect the USB cable to your tablet and hold down the volume+ button, keep the button pressed.

Connect the other end of the USB cable to your computer (keep that volume+ button pressed - I know, it hurts by now)

Using your third hand, straight after attaching the cable, and whilst still holding down the volume+ button, start pressing the tablet power button repeatedly (approx 1 press per second for 10 seconds is enough). This procedure puts the tablet into update mode.

After a few seconds a window will pop up on your PC asking if you want to perform a forced firmware update. You can stop the pain and release the volume+ at this point. Select yes. You will be asked if you're sure. Select yes.

The update will start and will take approx 3 minutes to complete. You will see a % complete progress bar during the process and will get a dialog saying OK when it's done. It is a non-linear progress bar, so even though it appears to be stuck at times, don't panic.

Turn your tablet on and you will have the new firmware, be happy/sad based on the fact that it is better/worse than your previous firmware

Download Android tablets & phones USB Driver Pack All In One Free Download


Download Android tablets & phones USB Driver Pack from here, here or here.
PhoenixSuit 1.08 About Tablet Free Download
This pack contains:

- A1x_Livesuit_109_32bit_64bit
- Google_Android_ADB_USB_Driver_Rev7
- HTC_Driver_4.0.0.009 
- Huawei Ascend G300 u8815
- Infotm_ADB_32bit
- Infotm_ADB_64bit
- Infotm_OTG_Driver
- Infotm_USB_Driver
- LG_United_Mobile_Driver_3.8.1
- MaPan_USB_Driver_Win7
- preinstall
- Rockchip_X64-64bit
- Rockchip_X86-32bit
- Rockusb_v3.5
- Samsung_Usb_Driver_1.5.15.0
- USB Device (VID_1f3a_PID_efe8)
- WM8850_ADB_Drivers

Enjoy, share is love

Crew RKTablets Genio CM10.1 v1.3 Firmware installed on Pipo S1 tablet Free Download


1. Backup your data.
2. Download the CM10.1 archive from here, here or Latest; (uploading) extract 'PipoS1_CM10.1_v1.3.2.rar'. Copy 'Oma RK30 CM10.1 Format NAND.zip' file to a microSD card.
3. Hard-off the tablet by long pressing the power button (4+ seconds). Insert microSD card. Hold down the VOL- button while inserting microUSB cable to enter download mode
4. Start the 'RKAndroidTool.exe' found in the 'RKDevelopTool_v1.35' folder (right-click, run as administrator). NOTE: The tool should say 'Found RKAndroid Loader Rock Usb'. Hit 'EraseIDB' and wait for success (Clears partition table) and then hit 'Run' once. INFO: Run OK', Pipo S1 will boot into recovery --> **RECOVERY SHOULD BE v6.0.3.1**
5. Wipe cache, Wipe data/factory reset, Install zip from external card 'Oma RK30 CM10.1 Format NAND.zip' and reboot. Wait 5 minutes.
6. Once the tablet starts, select your prefered launcher, hit 'immer' (always).
7. Set the language to English: Hit the setting icon, 'Systemeinstellungen', Scroll down to 'Sprache & Einabe', Set 'Sprache' to your desired language.
8. Fix landscape menu buttons not appearing. Go to play store, sign in. Install Textdroider DPI from play store. Set DPI to 120. Apply. Reboot. HINT: to use back & navigate button use the tablet in portrait mode.
9. Optional: If you want back the tablet interface with bottom notification bar then download TabletUI fix v1.3.2 and install it from microSD card via CWM.

Hints:
- enable development options > tap 5 times on build number
- higher performance > disable animation scales in developer options
- control Play-Store > disable auto-updates
- battery drain > set keep wi-fi on during sleep to never
- full access to the build > enable /system rw in File Manager HD
- load kernel modules > enable init.d ON in Pimp my Rom (reboot)
- don't show su notifications > disable in Superuser

Unresolved Issues:
- Wifi takes a few seconds to connect from sleep
- camera is upside down
- display artifacts on screen rotation

Troubleshooting:
Problem: If you get stuck with installs the loop you back to recovery constantly, you probably have CWM-based Recovery v6.0.1.5. This recovery does not work with the original Pipo S1 kernel.
Solution: Use recovery 6.0.3.1 with kernel RK3-_kernel_308_s1_pipo

Problem: You find yourself stuck in recovery with no way to power off
Solution: Select a menu item, highlight ++++Go Back++++, when you press the power button, do not let go until tablet powers off.

Build details:
- CyanogenMod 10.1 / Android Jelly bean 4.2.2
- Kernel 3.0.8+
- this firmware has root acces.
- Languages: all
- gapps are preinstalled
- Another preinstalled apps: AdAway, Apollo, CPU Tweaks, DSP Manager, File Manager HD, MX Player, Nova Launcher, Pimp My Rom, RebootMenu, Terminal Emulator, USB Host Controller, Viper4Android FX, etc...
- Antutu Benchmark score: about 10.000 points at 120 dpi;
- Build number: Oma RK30 CM10.1 v1.3.2 - 05.10.2013

Credits for this great ROM goes to Oma.
Credits for this tutorial goes to trenchtractor.

Always keep in mind that this is not a review, just a first sight of this firmware. You have to test it more for another details, to see if it satisfies your needs

Crew RKTablets Genio CM10.1 v1.3.3 Firmware installed on Pipo S1 tablet Free Download


1. Backup your data.
2. Download the CM10.1 archive from here, here or here; extract 'PipoS1_CM10.1_v1.3.3.rar'. Copy 'Oma RK30 CM10.1 Format NAND.zip' file to a microSD card.
3. Hard-off the tablet by long pressing the power button (4+ seconds). Insert microSD card. Hold down the VOL- button while inserting microUSB cable to enter download mode
4. Start the 'RKAndroidTool.exe' found in the 'RKDevelopTool_v1.35' folder (right-click, run as administrator). NOTE: The tool should say 'Found RKAndroid Loader Rock Usb'. Hit 'EraseIDB' and wait for success (Clears partition table) and then hit 'Run' once. INFO: Run OK', Pipo S1 will boot into recovery --> **RECOVERY SHOULD BE v6.0.3.1**
5. Wipe cache, Wipe data/factory reset, Install zip from external card 'Oma RK30 CM10.1 Format NAND.zip' and reboot. Wait 5 minutes.
6. Once the tablet starts, select your prefered launcher, hit 'immer' (always).
7. Set the language to English: Hit the setting icon, 'Systemeinstellungen', Scroll down to 'Sprache & Einabe', Set 'Sprache' to your desired language.
8. Fix landscape menu buttons not appearing. Go to play store, sign in. Install Textdroider DPI from play store. Set DPI to 120. Apply. Reboot. HINT: to use back & navigate button use the tablet in portrait mode.
9. Optional: If you want back the tablet interface with bottom notification bar then download TabletUI fix v1.3.2 and install it from microSD card via CWM.

What's new:
- a2dp fixed
- gapps updated

 Hints:
- enable development options > tap 5 times on build number
- higher performance > disable animation scales in developer options
- control Play-Store > disable auto-updates
- battery drain > set keep wi-fi on during sleep to never
- full access to the build > enable /system rw in File Manager HD
- load kernel modules > enable init.d ON in Pimp my Rom (reboot)
- don't show su notifications > disable in Superuser

Unresolved Issues:
- Wifi takes a few seconds to connect from sleep
- camera is upside down
- display artifacts on screen rotation

Troubleshooting:
Problem: If you get stuck with installs the loop you back to recovery constantly, you probably have CWM-based Recovery v6.0.1.5. This recovery does not work with the original Pipo S1 kernel.
Solution: Use recovery 6.0.3.1 with kernel RK3-_kernel_308_s1_pipo

Problem: You find yourself stuck in recovery with no way to power off
Solution: Select a menu item, highlight ++++Go Back++++, when you press the power button, do not let go until tablet powers off.


Build details:
- CyanogenMod 10.1 / Android Jelly bean 4.2.2
- Kernel 3.0.8+
- this firmware has root acces.
- Languages: all
- gapps are preinstalled
- Another preinstalled apps: AdAway, Apollo, CPU Tweaks, DSP Manager, File Manager HD, MX Player, Nova Launcher, Pimp My Rom, RebootMenu, Terminal Emulator, USB Host Controller, Viper4Android FX, etc...
- Antutu Benchmark score: about 10.000 points at 120 dpi;
- Build number: Oma RK30 CM10.1 v1.3.3 - 23.10.2013


Credits for this great ROM goes to Oma.
Credits for this tutorial goes to trenchtractor.

Always keep in mind that this is not a review, just a first sight of this firmware. You have to test it more for another details, to see if it satisfies your needs.Be aware: it is your own risk! 

Download Rockchip Driver Assistant About Tablet Free Download

Download the archive from here, here or here. Decompress it and the run 'RK Driver Assistant'. Choose “Uninstall Driver” if you have any RK driver installed before to wipe it clean, then choose “Install Driver”; If you haven’t install any device drivers before, simply choose “Install Driver”. When the dialogue box prompts out, choose “Install” twice. That's all, enjoy it!

Now we all are wainting for the Rockchip driver for Windows 8.1. We hope that will be soon.